Ewave Garment Steamer User Manual download pdf (Page 20)

Troubleshooting

This chapter summarizes the most common problems you

could encounter with your HAAN

Garment Steamer. Please

read the different sections for more details. If you are unable

to solve the problem, or have any questions not answered in

this manual please contact a Customer Care Representative

at 877-HAAN DIRECT (877-422-6347).

PROBLEM: Garment Steamer does not operate.

Possible Cause:

1) Power cord not firmly plugged into outlet.

2) No power in wall outlet.

Possible Solution:

1) Check plug in outlet and set plug firmly.

2) Check fuse or breaker. Replace fuse and/or

reset breaker.

PROBLEM: Garment Steamer does not emit steam or the

flow of steam has decreased.

Possible Cause:

1) No water in water tank.

Possible Solution:

1) Add water to the water tank following the

instructions on page 12.

PROBLEM: The hose makes a gargling noise and water

droplets have collected on the wand or

steam head.

Possible Cause:

1) If the hose is used for a substantial time in

a bent state, a gargling noise is emitted and

water droplets collect in the wand.

Possible Solution:

1) Extend the hose upward so it is no longer

bent and hold in this position for 2-3

seconds to allow the condensation to clear

within the hose and clear the passageway

for the steam.

pg 18 877-HAAN DIRECT / 877-422-6347 www.HAANUSA.com

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 29 30

No comments

Ewave Garment Steamer User Manual Page 20